Aluminium Wire Rods
6000 series aluminium rods are known for their exceptional combination of strength, corrosion resistance, and workability. These rods primarily contain aluminium with magnesium and silicon as the major alloying elements, contributing to their excellent mechanical and chemical properties.
6000 series aluminium alloys are primarily alloyed with magnesium and silicon, providing excellent strength, corrosion resistance, and machinability. Their chemical composition includes: (Al): 95.8% to 96.4%, (Mg): 0.8% to 0.90%, (Si): 0.4% to 0.8%, (Fe): Maximum 0.7%(Cu): Maximum 0.3%, (Mn): Maximum 0.15%, (Cr): Maximum 0.35%, (Zn): Maximum 0.25%, Residuals: Maximum 0.15%
| Aluminium Alloy Designation |
Si | Fe | Cu | Cr | Zn | Mn | Mg | B | Other Each |
Other Total |
AI |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 6101 | 0.40 – 0.80 | 0.50 | 0.10 | 0.03 | 0.10 | 0.03 | 0.50 – 0.80 | 0.06 | 0.03 | 0.10 | REM |
| 6201 | 0.50 – 0.90 | 0.50 | 0.10 | 0.03 | 0.10 | 0.03 | 0.60 – 0.90 | 0.06 | 0.03 | 0.10 | REM |
| Aluminium Alloy Designation |
APAR
Product Code |
Temper | Diameter | Tensile strength (Mpa) |
Elongation | Resistivity | Conductivity |
|---|---|---|---|---|---|---|---|
| (mm) | Min | (%) | (µΩm) | (%IACS) | |||
| 6101 | Alloy 6101 (T4), Sol. Tr. | T4 | 7.60 ± 0.40 | 157 | 14.0 | 34.482 | 50.00 |
| 9.50 ± 0.50 | |||||||
| 12.50 ± 0.50 | |||||||
| Alloy 6101 (T8), Sol. Tr. | T8 | 6.00 to 3.00 | 295 | 3.0 | 32.53 | 53.00 |
Note: All the data set out in this page is given for information purposes and Anannya Power will not be held responsible for its accuracy.
Download brochure